SDS1202X-E/ISOLATED Digital Oscilloscope 200MHz
SDS1202X-E /ISOLATED Digital Oscilloscope with isolated inputs
SIGLENT’s new SDS1000X-E Series Super Phosphor Oscilloscope is available in one bandwidth, 200 MHz. It has a maximum sample rate of 1 GSa/s and a standard record
length of 14 Mpts. For ease-of-use, the most commonly used functions can be accessed with its user-friendly front panel design.The SDS1000X-E series employs a new generation of SPO (Super Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes
with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/ sec (sequence mode).
The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. Siglent’s latest oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC,SPI,UART,CAN,LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1 million points FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and performance of Siglent’s new SDS1000X-E cannot be matched anything else in this price class.
◆ 200 MHz bandwidth model
◆ Real-time sampling rate up to 1 GSa/s
◆ New generation of SPO technology
◆ Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s(sequence mode)
◆ Supports 256-level intensity grading and color display mode
◆ Record length up to 14 Mpts
◆ Digital trigger system
◆ Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern
◆ Serial bus triggering and decode, supports protocols IIC, SPI, UART, RS232, CAN, LIN （Standard）
◆ Video triggers and supports HDTV
◆ Low background noise, supports 500 μV / div to 10 V / div voltage scales
◆10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print
◆ Segmented acquisition (Sequence) mode, dividing the maximum record length into multiple segments (up to 80,000), according to trigger conditions
set by the user, with a very small dead time segment to capture the qualifying event.
◆ History waveform record (History) function, the maximum recorded waveform length is 80,000 frames
◆ Automatic measurement function on 38 parameters, supports Statistics, Gating measurement, Math measurement, History measurement and Ref measurement
◆ 1M points FFT
◆ True measurement and math to all of sample 14M points Math functions (FFT, addition, subtraction, multiplication, division, integration, differential, square root)
◆ Preset key can be customized for user settings or factory “defaults”
◆ Security Erase mode
◆ High Speed hardware based Pass/ Fail function
◆ Large 7 inch TFT-LCD display with 800 * 480 resolution
◆ Multiple interface types: USB Host, USB Device (USB-TMC), LAN (VXI-11), Pass / Fail, Trigger Out
◆ Supports SCPI remote control commands
◆ Supports Multi-language display and embedded online help
7 inch TFT-LCD display and 10 one-button menus
• 7 -inch TFT -LCD display with 800 * 480 resolution
• Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, Print
When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active,
that channel has sample rate of 1 GSa/s.
The four channel series has two 1 GSa/s ADC chips (channel 1 and 2 share one, channel 3 and 4 share another), so that each channel can achieve sample
rates up to 500 MSa/and work on bandwidths of 200 MHz when all channels are enabled.
Record Length of Up to 14 Mpts (single channel/pair mode),
7 Mpts/CH (two channels/ pair mode)
Using hardware-based Zoom technologies and max record length of up
to 14 Mpts, users are able to oversample to capture for longer time periods
at higher resolution and use the zoom feature to see more details
within each signal.
Waveform Capture Rate Up to 400,000wfm/s
With a waveform capture rate of up to 400,000 wfm/s (sequence mode),
the oscilloscope can easily capture the unusual or low-probability events.
256 - Level Intensity Grading and Color Temperature Display
SPO display technology provides for fast refresh rates. The resulting
intensity-graded trace is brighter for events that occur with more frequency
and dims when the events occur with less frequency.
The color temperature display is similar to the intensity-graded trace function
but the trace occurrence is represented by different colors (color “temperature”)
as opposed to changes in the intensity of one color. Red colors represents the
more frequent events, while blue is used to mark points that occur less frequently.
Serial Bus Decoding Function (Standard)
SDS1202X-E displays the decoding through the events list. Bus
protocol information can be quickly and intuitively displayed in a
History Waveforms(History) Mode and
Playback the latest triggered events using the history function.Segmented memory collection
will store trigger events into multiple (Up to 80,000 memory segments, each segment will
store triggered waveforms and timestamp each frame.
True measurement to 14 M points
At any one timebase, SDS1000X-E can measure using all 14 M sample points.
This ensures the accuracy of measurements while the math coprocessor decreases
measurement time and increases ease-of-use.
Gate and Zoom Measurement
Through Gate and Zoom measurement, the user can specify an arbitrary
interval of waveform data analysis and statistics. This helps avoid measurement
errors that can be caused by invalid or extraneous data, greatly enhancing the
measurements’ validity and flexibility.
1 M points FFT
The new math co-processor enables FFT analysis of incoming signals
using up to 1 M samples per waveform. This provides high frequency resolution
with a fast refresh rate. The FFT function also supports a variety of window functions
so that it can adapt to different spectrum measurement needs.
Hardware-Based High Speed Pass/ Fail function
The SDS1000X-E utilizes a hardware-based Pass/Fail function, performing up
to 40,000 Pass / Fail decisions each second. Easily generate user defined test
templates provide trace mask comparison making it suitable for long-term signal
monitoring or automated production line testing.
Customizable Default Key
The current parameters of the oscilloscope can be preset to Default Key
through the Save menu.
SDS1000X -E supports USB Host, USB Device (USB -TMC), LAN(VXI -11), Pass/Fail and Trigger Out
Available with the following options :
- SDS-1000X-E-FG - 25 MHz function/arbitrary waveform generator(Software)
- SAG1021 - 25 MHz function/arbitrary waveform generator
- SDS1000X-E-16LA - MSO Function for SDS1000X-E oscilloscope,16-channel,500MSa/s,14Mpts (Software)
- SLA1016 - MSO Function for SDS1000X-E oscilloscope,16-channel,500MSa/s,14Mpts
- SDS1000X-E-WIFI - Wireless communication function, 802.11b/g/n, WPA-PSK(Software)
- TL-WN725N - Wireless communication function, 802.11b/g/n, WPA-PSK