web counter

Our company will remain closed from 11-8-2022 to 29-8-2022 for summer vacation.
All orders will be processed on early September.

IT8513C+ Programmable DC Electronic Load 120V/120A/600W

IT8513C+ Programmable DC Electronic Load 120V/120A/600W
Click image for Gallery
  • Brands ITECH
  • Product Code: IT8513C+
  • Availability: 2-3 Weeks
  • 725.00€ 690.00€
  • *Η τιμή είναι χωρίς Φ.Π.Α.
  • *Οι τιμές ισχύουν ΜΟΝΟ για ηλεκτρονική αγορά από το e-shop μας.
- +


Product Overview   

IT8513C+ single-channel programmable DC electronic load is designed for middle & high-end applications. It covers all of the customer's design and testing requirements. The user can perform online voltage measurements and adjustments or simulate short circuit test using the simple keypad on the front panel. IT8513C+ DC load is a versatile instrument for static and dynamic testing of power supplies, batteries, DC - DC converters, battery chargers, provides user the best testing solution.



Key Features:

♦ Max. Voltage  : 120V

♦ Max. Current  : 120A

♦ Max. Power    : 600W

♦ Four operating modes: CV,CC,CR,CP

♦ Battery test function, automatic test function, OPP test, OCP test function and CR-LED function.

♦ Dynamic mode up to 10KHz

♦ Voltage measurement resolution up to 0.1mV / 0.1mA

♦ Remote sense

♦ Short circuit function

♦ Current monitoring function

♦ Power-off memory function

♦ 100 groups memory capacity

♦ Optional USB / RS232 / RS485 interface


Dynamic test function


The dynamic test operation allows the electronic load to be switched between the two setting parameters according to the setting rules. This function is used to test the dynamic characteristics of the power supply.


♦ Continuous mode: Under continuous mode, When the dynamic test operation is enabled, load will be continuously switched between the A value and the B value .




♦ Pulse mode: Under pulse mode, when the dynamic test operation is enabled, each receive a trigger signal, the load will switch to the B value, after maintaining the B pulse width time, switch back to the A value.




♦ Toggle mode: In the trigger mode, when the dynamic test operation is enabled, each time a trigger signal is received, the load is switched between the A value and the B value.




Battery discharge test function


IT8513C+ electronic load can use constant current mode for battery discharge test. After the discharge test mode is selected, the test mode termination condition "switch off voltage value", "switch off capacity value" and "discharge time" can be set. When any of the three conditions is satisfied, the discharge is stopped and the electronic load is automatically switched is OFF state. Users can observe the battery voltage, time and battery discharge capacity during the test process.


Related Products